|
The Ranco ETC is a micorprocessor based temperature controller suitable for switching 120Volts at up to 16Amps for heating or cooling applications making it suitable for a wide range of applications. This is a great universal controller for any application where switching 120Volts or temperatures outside that of a normal home thermostat is required. The sensor with an 8' foot cable and instructions are included with the unit.
The Ranco ETC-211100 is identical to the Ranco ETC-111100 except that this unit is 2 stage, and has 2 relays to control both heating and cooling at the same time. (The output relay NC and NO ratings are also different)
Specifications:
- Temperature Setpoint Range: -30° to 220°F
- Differential range: 1° to 30°F
- Input Voltage: 120VAC, 208, 240VAC
- Output: 0 to 10 Volts
- Output Imedance: 1K Ohms
- Pilot duty: 125VA at 120/208/240VAC
- Sensor: Thermistor, 2" long x 1/4"dia with 8' cable (included)
- Control Ambient Temperatures
- Operating: -20° to 140°
- Storage: -40° to 176°
- Ambient humidity: 0 to 95% RH, non-condensing
- Enclosure: NEMA 1
- Dimensions: 6.52" high x 2.7" wide x 2.48" deep
- Agency Approvals: UL listed, file E94419, Guide XAPX, CSA certified, file LR68340, class 4813 02
|
Relay Output Ratings - NO (NC)
|
120V
|
208/240V
|
|
Full load amps
|
9.8 (5.8) A
|
4.0 (2.9 A)
|
|
Locked rotor amps
|
58.8 (34.8) A
|
29.4(17.4) A
|
|
Resistive amps
|
9.6 (5.8) A
|
4.9 (2.9) A
|
|
Horsepower
|
1/2 (1/4) HP
|
1/2 (1/4) HP
|
For more information see the data sheet (Adobe Acrobat required).
The installation instructions for the 2 Stage Ranco ETC controllers are also available for download as a PDF.
Unsure which Ranco ETC Controller you need? Check out our ETC Selector.
'ETC-211100-000' Replaces part numbers: ETC-211100-000, ETC211100000...(View complete cross reference list)
|
A Division of Honey Run Apiaries
