Ranco ETC-111000-000 Prewired with Stopper Thermal Well

Buy both the ETC-111000-000 prewired temperature controller and 15" Stainless steel stopper thermal well and save.  Ideal for Brewing, Sous Vide, aquariums and more...

The Ranco ETC is a micorprocessor based temperature controller suitable for switching 120Volts at up to 16Amps for heating or cooling applications making it suitable for a wide range of applications.  This is a great universal controller for any application where switching 120Volts or temperatures outside that of a normal home thermostat is required.  The sensor with an 8' foot cable and instructions are included with the unit.  (This is the Goldline SP-30 alternative.  Goldline HVAC controllers are no longer being manufactured.)

This is the same as our regular Ranco ETC-111000-000 controller except that it has been prewried for 120 Volts with a 10'-16 gage cord and an 8' output cord where you can plug in your heater, fan, or other device.  This is great for those who lack the skills of knowlege to wire the controller themselves.  Since we wire and tests these controllers before shipping we would be happy to accomodate your requests for different length cords or other changes to the wireing.  Please e-mail us with your requirements.  If you do not need the controller wired it can be purchased here.

This also includes the 15" Stainless steel thermowell.  This thermowell is ideal for use in brewing to control fermentation temperatures, aquariums, sous vide cooking and dozens of other applications where a more expensive machined and threaded stainless thermal well is not required.

Specifications:

• Temperature Setpoint Range:  -30° to 220°F
• Differential range: 1° to 30°F
• Input Voltage: 120VAC
• Sensor:  Thermistor, 2" long x 1/4"dia with 8' cable (included)
• Control Ambient Temperatures
  • Operating:  -20° to 140°
  • Storage: -40° to 176°
• Ambient humidity:  0 to 95% RH, non-condensing
• Enclosure:  NEMA 1
• Dimensions: 6.52" high x 2.7" wide x 2.48" deep
• Relay Output Ratings (SPDT)
  • Normally Open (NO): 16 Amps @120Volts
  • Normally Closed (NC): 8 Amps @120Volts

For more information see the data sheet(Adobe Acrobat required).
The installation instructions for the Ranco ETC controllers are also available for download as a PDF.